Follow these easy steps to get your Zanussi TCS 683 Dryer up and running in no time.
Place the tumble dryer on any firm, level surface. Ensure it is perfectly level using a spirit level.
Have a qualified electrician perform any electrical work required to install this appliance. It operates on a 220-230 V, single-phase, 50 Hz supply.
Ensure the room is well-ventilated and that the temperature does not exceed 35°C during operation.
If a sink or drain is nearby, discharge condensed water directly through a market-available hose. Remove the clamp, pull out the plug, insert the hose, and fasten it with the clamp.
Before first use, load a few moist cloths and let the dryer run for about 20 minutes to remove any dust and dirt inside the drum.
Connect the appliance, load the laundry, close the door, select the desired drying time, and press the start button. The machine will stop once the program is complete.
After each drying program, clean the fluff filter using a damp cloth to ensure optimal performance.
After each cycle, empty the water container where water extracted from the laundry is collected.